Dell S2830dn Smart Printer User Guide - Page 137
Skewed print, Step 6, Warning-Potential Damage
View all Dell S2830dn manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 137 highlights
Troubleshooting 137 Action Yes Step 6 a Redistribute the toner in the imaging unit. 1 Remove the toner cartridge, and then the imaging unit. 2 Firmly shake the imaging unit. Warning-Potential Damage: Do not expose the imaging unit to direct light for more than 10 minutes. Extended exposure to light may cause print quality problems. 3 Install the imaging unit, and then the cartridge. b Resend the print job. Go to step 7. No The problem is solved. Is the print still too light? Step 7 Replace the imaging unit, and then resend the print job. Contact technical The problem is support. solved. Is the print still too light? Skewed print Action Step 1 a Move the width and length guides in the tray to the correct positions for the size of the paper loaded. b Resend the print job. Yes Go to step 2. No The problem is solved. Is the print still skewed? Step 2 a Check if you are printing on a paper that is supported by the tray. b Resend the print job. Contact technical support. The problem is solved. Is the print still skewed?