Dell S2830dn Smart Printer User Guide - Page 66
Set Date and Time menu, Configure Log, Notes, Current Date and Time, Manually Set Date and Time
![]() |
View all Dell S2830dn manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 66 highlights
Understanding the printer menus 66 Use Configure Log Enable Audit Yes No Enable Remote Syslog No Yes Remote Syslog Facility 0-23 Severity of events to log 0-7 To Specify how and whether or not audit logs are created. Notes: • Enable Audit determines if events are recorded in the secure audit log and remote syslog. No is the factory default setting. • Enable Remote Syslog determines if logs are sent to a remote server. No is the factory default setting. • Remote Syslog Facility determines the value used to send logs to the remote syslog server. 4 is the factory default setting. • If the security audit log is activated, then the severity value of each event is recorded. 4 is the factory default setting. Set Date and Time menu Use Current Date and Time Manually Set Date and Time [input date/time] Time Zone [list of time zones] Automatically observe DST On Off Enable NTP On Off To View the current date and time settings for the printer. Note: The date and time are set in YYYY‑MM‑DD HH:MM format. Enter the date and time. Note: Setting the date and time using this menu automatically sets Enable NTP to Off. Select the time zone. Note: GMT is the factory default setting. Set the printer to use the applicable daylight saving time (DST) start and end times associated with the printer Time Zone setting. Note: On is the factory default setting. Enable Network Time Protocol, which synchronizes the clocks of devices on a network. Notes: • On is the factory default setting. • Enable NTP is automatically set to Off if you manually set the date and time.
![](/manual_guide/products/dell-s2830dn-smart-printer-user-guide-3edd898/66.png)