Dell S2830dn Smart Printer User Guide - Page 84
Adjusting Sleep Mode, Using Hibernate mode, Adjusting the brightness of the printer display
![]() |
View all Dell S2830dn manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 84 highlights
Saving money and the environment 84 Adjusting Sleep Mode 1 From the printer control panel, navigate to: > Settings > > Settings > > General Settings > > Timeouts > 2 Set the time that the printer stays idle before it enters Sleep Mode. 3 Apply the changes. > Sleep Mode > Using Hibernate mode Hibernate is an ultra‑low‑power saving mode. Notes: • Three days is the default amount of time before the printer enters Hibernate mode. • Make sure to wake the printer from Hibernate mode before sending a print job. A hard reset or a long press of the Sleep button wakes the printer from Hibernate mode. • If the printer is in Hibernate mode, then the Embedded Web Server is disabled. 1 From the control panel, navigate to: > Settings > > Settings > > General Settings > 2 Select Press Sleep Button or Press and Hold Sleep Button, and then press . 3 Press Hibernate > . Adjusting the brightness of the printer display To save energy, or if you have trouble reading the display, adjust its brightness settings. Using the Embedded Web Server 1 Open a Web browser, and then type the printer IP address in the address field. Notes: • View the printer IP address in the TCP/IP section in the Network/Ports menu. The IP address appears as four sets of numbers separated by periods, such as 123.123.123.123. • If you are using a proxy server, then temporarily disable it to load the Web page correctly. 2 Click Settings > General Settings. 3 In the Screen Brightness field, enter the brightness percentage you want for the display. 4 Click Submit.
![](/manual_guide/products/dell-s2830dn-smart-printer-user-guide-3edd898/84.png)