Dell S2830dn Smart Printer User Guide - Page 68
Paper Sizes, Notes, Home screen customization, Timeouts
View all Dell S2830dn manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 68 highlights
Understanding the printer menus Use Paper Sizes US Metric Home screen customization Change Language Search Held Jobs Held Jobs Timeouts Sleep Mode Disabled 1-120 Timeouts Print with Display Off Allow printing with display off Display on when printing Timeouts Hibernate Timeout Disabled 20 minutes 1‑3 hours 6 hours 1‑3 days 1‑2 weeks 1 month Timeouts Hibernate Timeout on Connection Hibernate Do Not Hibernate Timeouts Screen Timeout 15-300 68 To Specify the unit of measurement for paper sizes. Notes: • US is the factory default setting. • The country or region you selected during the initial setup determines the initial setting. Change the icons that appear on the home screen. Note: Do not display is the factory default setting. Set the amount of time in minutes that the printer waits before it goes into a reduced power state after printing. Notes: • 20 is the factory default setting. • Disabled appears only when Energy Conserve is set to Off. • The maximum amount of time is increased to 240 minutes when Energy Conserve is set to Off. • Lower settings conserve more energy, but may require longer warm‑up times. • If the printer is in constant use, then select a high setting to keep the printer ready to print with minimum warm‑up time. Print a job with the display turned off. Note: Display on when printing is the factory default setting. Set the amount of time that the printer waits before it enters Hibernate mode. Note: 3 days is the factory default setting. Set the printer to Hibernate mode even if there is an active Ethernet connection. Note: Do Not Hibernate is the factory default setting. Set the amount of time in seconds before returning the control panel to a Ready state. Note: 30 is the factory default setting.