Dell S2830dn Smart Printer User Guide - Page 59
Wireless menu, Fi Protected Setup WPS
View all Dell S2830dn manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 59 highlights
Understanding the printer menus 59 Use To Auto Configuration On Off Specify whether or not the network adapter accepts the automatic IPv6 address configuration entries provided by a router. Note: On is the factory default setting. Set Hostname* Set the host name. Note: The host name is limited to 15 characters, and accepts US‑ASCII, alphanumeric characters and hyphen only. View Address* View the current IPv6 addresses. View Router Address* View the current router address. Enable DHCPv6 On Off Enable DHCPv6 in the printer. Note: On is the factory default setting. * These settings can be changed only from the Embedded Web Server. Wireless menu Note: This menu is available only in printer models connected to a wireless network. Use Wi‑Fi Protected Setup (WPS) Start Push Button Method Start PIN Method Enable/Disable WPS Auto‑detection Enable Disable Network Mode Infrastructure Ad hoc Compatibility 802.11b/g 802.11 b/g/n Choose Network View Signal Quality View Security Mode To Establish a wireless network and enable network security. Notes: • Start Push Button Method connects the printer to a wireless network by pressing buttons on both the printer and the access point (wireless router) within a given period of time. • Start PIN Method connects the printer to a wireless network by using a PIN on the printer and entering it into the wireless settings of the access point. Automatically detect the connection method that an access point with WPS uses-Start Push Button Method or Start PIN Method. Note: Disable is the factory default setting. Specify the network mode. Notes: • Ad hoc is the factory default setting. This configures wireless connection directly between the printer and a computer. • Infrastructure lets the printer access a network using an access point. Specify the wireless standard for the wireless network. Note: The 802.11b/g/n is the factory default setting. Select an available network for the printer to use. View the quality of the wireless connection. View the encryption method for the wireless network.