Dell S5148F-ON EMC Networking OS10 Enterprise Edition Switch Configuration Gui - Page 28
Con the switch interconnect
View all Dell S5148F-ON manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 28 highlights
S5148F-Leaf1A switchport trunk allowed vlan 16121615 spanning-tree port type edge flowcontrol receive on flowcontrol transmit off no shutdown interface ethernet1/1/18 description Node2_Port1 switchport mode trunk switchport access vlan 1611 switchport trunk allowed vlan 16121615 spanning-tree port type edge flowcontrol receive on flowcontrol transmit off no shutdown interface ethernet1/1/19 description Node3_Port1 switchport mode trunk switchport access vlan 1611 switchport trunk allowed vlan 16121615 spanning-tree port type edge flowcontrol receive on flowcontrol transmit off no shutdown interface ethernet1/1/20 description Node4_Port1 switchport mode trunk switchport access vlan 1611 switchport trunk allowed vlan 16121615 spanning-tree port type edge flowcontrol receive on flowcontrol transmit off no shutdown S5148F-Leaf1B switchport trunk allowed vlan 16121615 spanning-tree port type edge flowcontrol receive on flowcontrol transmit off no shutdown interface ethernet1/1/18 description Node2_Port2 switchport mode trunk switchport access vlan 1611 switchport trunk allowed vlan 16121615 spanning-tree port type edge flowcontrol receive on flowcontrol transmit off no shutdown interface ethernet1/1/19 description Node3_Port2 switchport mode trunk switchport access vlan 1611 switchport trunk allowed vlan 16121615 spanning-tree port type edge flowcontrol receive on flowcontrol transmit off no shutdown interface ethernet1/1/20 description Node4_Port2 switchport mode trunk switchport access vlan 1611 switchport trunk allowed vlan 16121615 spanning-tree port type edge flowcontrol receive on flowcontrol transmit off no shutdown 7.2.4 Configure the switch interconnect Create a port channel to use between the two leaf switches, 127 in this example. Use the switchport mode trunk command to enable the port channel to carry traffic for multiple VLANs, and allow all VLANs on the port channel. Use 100GbE interfaces for the port channel, 1/1/53 and 1/1/54 in this example. Add each interface to the port channel as LACP active members with the channel-group 127 mode active command. When the configuration is complete, exit configuration mode and save the configuration with the end and write memory commands. 28 Dell EMC Networking OS10 Enterprise Edition Switch Configuration Guide for VxRail 4.5