Dell S5148F-ON EMC Networking OS10 Enterprise Edition Switch Configuration Gui - Page 7
Hardware overview
![]() |
View all Dell S5148F-ON manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 7 highlights
2 2.1 Hardware overview This section briefly describes the hardware used to validate this deployment. Appendix A and Appendix B contain a complete listing of hardware and software validated for this guide. Dell EMC PowerSwitch S5148F-ON The S5148F-ON is a 1-RU, multilayer switch with 48x25GbE, and 6x100GbE or 72x25GbE ports. This guide uses two S5148F-ONs as leaf switches. 2.2 Dell EMC PowerSwitch S5148F-ON Dell EMC PowerSwitch S3048-ON The S3048-ON is a 1-RU switch with 48x1GbE BASE-T ports and 4x10GbE SFP+ ports. This guide uses one S3048-ON switch for out-of-band (OOB) management traffic. 2.3 Dell EMC PowerSwitch S3048-ON Dell EMC VxRail 14G nodes Current Dell EMC VxRail P, V, S, and E Series nodes are built on 14th generation (14G) PowerEdge servers. P, V, and S Series nodes use a 2-RU form factor, as shown in Figure 4. Dell EMC VxRail 2-RU node (P, V, and S Series) Dell EMC VxRail E Series nodes use a 1-Rack Unit (RU) form factor, as shown in Figure 5. Dell EMC VxRail E Series node 7 Dell EMC Networking OS10 Enterprise Edition Switch Configuration Guide for VxRail 4.5
![](/manual_guide/products/dell-powerswitch-s5148fon-emc-networking-os10-enterprise-edition-switch-configuration-guide-vxrail-45-e518bfd/7.png)