Dell S560P Interactive Projector Users Guide - Page 43

Lamp Lamp life VGA input: One 15-pin D-sub connector (Blue), VGA In, for analog RGB/Component input signals. VGA output: One 15-pin D-sub connector (Black) for VGA loop through. Composite Video input: One Yellow RCA jack for CVBS signal. HDMI input: Two HDMI connectors for supporting HDMI 1.4a. specification HDCP compliant. Analog Audio input: One 3.5 mm stereo mini phone jack (Blue)/ One x Audio In RCA pair (L/R) Variable audio output: One 3.5 mm stereo mini phone jack (Green). Analog Audio input:Two 3.5 mm stereo mini phone jack(Blue) and two pair of RCA connector (Red/White) Microphone : One 3.5 mm stereo mini phone jack (Pink). USB (mini USB) port: One mini USB slave for firmware upgrade/ interactive. 5V/1.8A output: One USB type A 5V DC / 1.8 A output for support dongle power. RS232 port: One 9-pin D-sub for RS232 communication. RJ-45 port: One RJ-45 connector for build-in for network control. Touch Unit: one Curtain Module power Jack PHILIPS 260 W user-replaceable lamp Normal mode: Up to 3000 hours Eco mode: Up to 5000 hours NOTE: The lamp life rating for any projector is a measure of brightness degradation only, and is not a specification for the time it takes a lamp to fail and cease light output. Lamp life is defined as the time it takes for more than 50 percent of a lamp sample population to have brightness decrease by approximately 50 percent of the rated lumens for the specified lamp. The lamp life rating is not guaranteed Specifications 43