Dell Vostro 16 5630 Service Manual - Page 24
Removing the M.2 2280 solid-state drive, About this task, Steps, Next steps, Prerequisites
View all Dell Vostro 16 5630 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 24 highlights
About this task NOTE: This computer supports two solid-state drive form factors. ● M.2 2230 ● M.2 2280 If you are replacing the M.2 2280 solid-state drive with an M.2 2230 solid-state drive, the following images indicate how to install the solid-state drive bracket to the M.2 2230 solid-state drive card before installing the 2230 solid-state drive to the computer. The following image(s) indicate the location of the M.2 2230 solid-state drive and provides a visual representation of the installation procedure. Steps 1. With the printed side of the solid-state drive facing up, align the screw hole on the M.2 2230 solid-state drive with the screw hole on the M.2 solid-state drive bracket. 2. Secure the M.2 2230 solid-state drive to the M.2 solid-state drive bracket with a M2x1.8 screw. 3. Align the notch on the M.2 2230 solid-state drive with the tab on the solid-state drive slot. 4. Gently slide the M.2 2230 solid-state drive with bracket into the solid-state drive slot. 5. Replace the screw (M2x3) that secures the M.2 solid-state drive with bracket to the system board. Next steps 1. Install the base cover. 2. Follow the procedure in After working inside your computer. Removing the M.2 2280 solid-state drive Prerequisites 1. Follow the procedure in Before working inside your computer. 2. Remove the base cover. About this task NOTE: Before removing the base cover, ensure that there is no SD card installed in the SD card slot on your computer. 24 Removing and installing components