Dell Vostro 16 5630 Service Manual - Page 62
Table 9. System setup options-Power menu continued, Table 10. System setup options-Security menu
View all Dell Vostro 16 5630 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 62 highlights
Table 9. System setup options-Power menu (continued) Power NOTE: This feature requires Deep Sleep Control to be disabled. NOTE: This feature is only functional when the AC power adapter is connected. If the AC power adapter is removed before Standby, the BIOS will remove power from all of the USB ports to conserve battery power. By default, the Enable USB Wake Support option is disabled. Wake on Dell USB-C Dock When enabled, connecting a Dell USB-C Dock will wake the system from Standby, Hibernate, and Power Off. By default, the Wake on Dell USB-C Dock option is enabled. Block Sleep Enables to block entering sleep (S3) mode in the operating system. By default, the Block Sleep option is disabled. Lid Switch Enabled Lid Switch Enable or disable the lid switch. By default, the Enable Lid Switch option is enabled. Power On Lid Open When enabled, allows the system to power up from the off state whenever the lid is opened. By default, the Power On Lid Open option is enabled. Intel Speed Shift Technology Enable or disable the Intel speed shift technology support. By default, the Intel Speed Shift Technology option is enabled. Table 10. System setup options-Security menu Security TPM 2.0 Security TPM 2.0 Security On Allows you to enable or disable TPM visibility to operating system. By default, the TPM 2.0 Security On option is enabled. Attestation Enable Enables to control whether the Trusted Platform Module (TPM) Endorsement Hierarchy is available to the operating system. By default, the Attestation Enable option is enabled. Key Storage Enable Enables to control whether the Trusted Platform Module (TPM) Storage Hierarchy is available to the operating system. By default, the Key Storage Enable option is enabled. SHA-256 When enabled, the BIOS and TPM will use the SHA-256 hash algorithm to extend measurements into the TPM PCRs during BIOS boot. By default, the SHA-256 option is enabled. Clear Enables to clear the TPM owner information and returns the TPM to the default state. By default, the Clear option is disabled. PPI Bypass for Clear Commands Controls the TPM Physical Presence Interface (PPI). By default, the PPI ByPass for clear Commands option is disabled. SMM Security Mitigation Enable or disable additional UEFI SMM Security Mitigation protections. By default, the option is enabled. Data Wipe on Next Boot 62 System setup