Dell Vostro 16 5630 Service Manual - Page 40
Installing the power button, Prerequisites
View all Dell Vostro 16 5630 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 40 highlights
Installing the power button Prerequisites CAUTION: The information in this section is intended for authorized service technicians only. If you are replacing a component, remove the existing component before performing the installation process. About this task The following image(s) indicate the location of the power button and provides a visual representation of the installation procedure. Steps 1. Place the power button on the palm-rest and keyboard assembly. 2. Align the screw hole on the power button with the screw hole on the palm-rest and keyboard assembly. 3. Replace the screw (M2x3) that secures the power buttonto the palm-rest and keyboard assembly. 4. Close the left display hinge and align the screw holes on the left display hinge with the screw holes on the palm-rest and keyboard assembly. 5. Replace the three screws (M2.5x5) that secure the left display hinge to the palm-rest and keyboard assembly. Next steps 1. Install the I/O board. 2. Install the base cover. 3. Follow the procedure in After working inside your computer. 40 Removing and installing components