Dell Vostro 16 5630 Service Manual - Page 43
Steps, Open the latch and disconnect the display cable from the system board.
View all Dell Vostro 16 5630 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 43 highlights
Steps 1. Remove the three screws (M2.5x5) that secure the left display hinge to the system board. 2. Open the left display hinge at an angle of 90 degrees. 3. Remove the three screws (M2.5x5) that secure the right display hinge to the system board. 4. Open the right display hinge at an angle of 90 degrees. 5. Peel the tape that secures the display-cable connector latch to the system board. 6. Open the latch and disconnect the display cable from the system board. 7. Remove the display cable from the routing guides on the palm-rest and keyboard assembly. 8. At an angle, gently lift the palm-rest and keyboard assembly off the display assembly. Removing and installing components 43
Steps
1.
Remove the three screws (M2.5x5) that secure the left display hinge to the system board.
2.
Open the left display hinge at an angle of 90 degrees.
3.
Remove the three screws (M2.5x5) that secure the right display hinge to the system board.
4.
Open the right display hinge at an angle of 90 degrees.
5.
Peel the tape that secures the display-cable connector latch to the system board.
6.
Open the latch and disconnect the display cable from the system board.
7.
Remove the display cable from the routing guides on the palm-rest and keyboard assembly.
8.
At an angle, gently lift the palm-rest and keyboard assembly off the display assembly.
Removing and installing components
43