Dell Vostro 16 5630 Service Manual - Page 26
Heat sink
![]() |
View all Dell Vostro 16 5630 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 26 highlights
Steps 1. Align the notch on the M.2 2280 solid-state drive with the tab on the solid-state drive slot. 2. Gently slide the M.2 2280 solid-state drive into the solid-state drive slot. 3. Replace the screw (M2x3) that secures the M.2 2280 solid-state drive to the system board. Next steps 1. Install the base cover. 2. Follow the procedure in After working inside your computer. Heat sink Removing the heat sink for computers shipped with a NVIDIA GeForce RTX 2050 Ti graphics card Prerequisites CAUTION: The information in this section is intended for authorized service technicians only. 1. Follow the procedure in Before working inside your computer. 2. Remove the base cover. About this task NOTE: Before removing the base cover, ensure that there is no SD card installed in the SD card slot on your computer. The following image(s) indicate the location of the heat sink and provides a visual representation of the removal procedure. 26 Removing and installing components
![](/manual_guide/products/dell-vostro-16-5630-service-manual-4219d32/26.png)