Dell Vostro 7590 Service Manual - Page 13
Installing the base cover
View all Dell Vostro 7590 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 13 highlights
3 Pry open the base cover starting from the top-center edge of the palm-rest and keyboard assembly and follow the "guidance line" indicated in the image to remove the base cover. 4 Lift the base cover off the palm-rest and keyboard assembly. Installing the base cover Prerequisite If you are replacing a component, remove the existing component before performing the installation procedure. About this task The figure indicates the location of the base cover and provides a visual representation of the installation procedure. Steps 1 Place the base cover on the palm-rest and keyboard assembly, and snap the base cover into place. 2 Tighten the three captive screws that secure the base cover to the palm-rest and keyboard assembly. 3 Replace the five screws (M2x5) that secure the base cover to the palm-rest and keyboard assembly. Next step 1 Follow the procedure in After working inside your computer. Disassembly and reassembly 13