Dell Vostro 7590 Service Manual - Page 52
Display assembly, Removing the display assembly
View all Dell Vostro 7590 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 52 highlights
Steps 1 Align and place the touchpad into the slot on the palm-rest and keyboard assembly. 2 Replace the two (M1.6x2) screws that secure the touchpad to the palm-rest and keyboard assembly. 3 Slide the touchpad cable onto its connector on the system board and close the latch to secure the cable. 4 Align and place the touchpad bracket into the slot on the palm-rest and keyboard assembly. 5 Replace the three (M2x3) screws that secure the touchpad bracket to the palm-rest and keyboard assembly. Next step 1 Install the speakers. 2 Install the battery. 3 Install the base cover. 4 Follow the procedure in After working inside your computer. Display assembly Removing the display assembly Prerequisites 1 Follow the procedure in Before working inside your computer. 2 Remove the base cover. 3 Remove the battery. 4 Remove the WLAN card. About this task The figure indicates the location of the display assembly and provides a visual representation of the removal procedure. 52 Disassembly and reassembly