Dell Vostro 7590 Service Manual - Page 39
Removing the heat sink—discrete
![]() |
View all Dell Vostro 7590 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 39 highlights
Steps 1 Place the heat sink on the system board and align the screw holes on the heat sink with the screw holes on the system board. 2 In sequential order (as indicated on the heat sink), tighten the four captive screws that secure the heat sink to the system board. Next step 1 Install the CPU fan. 2 Install the GPU fan. 3 Install the battery. 4 Install the base cover. 5 Follow the procedure in After working inside your computer. Removing the heat sink-discrete NOTE: The heat sink type in your computer varies depending on the configuration ordered. Prerequisites 1 Follow the procedure in Before working inside your computer. 2 Remove the base cover. 3 Remove the battery. 4 Remove the GPU fan. 5 Remove the CPU fan. About this task The figure indicates the location of the heat sink and provides a visual representation of the removal procedure. Disassembly and reassembly 39
![](/manual_guide/products/dell-vostro-7590-service-manual-b0f00fa/39.png)