Dell Vostro 7590 Service Manual - Page 20
Memory modules, Removing the memory modules
View all Dell Vostro 7590 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 20 highlights
Steps 1 Align the notch on the WLAN card with the tab on the WLAN card slot and insert the WLAN card at an angle into the WLAN card slot. 2 Connect the antenna cables to the WLAN card. 3 Align and place the WLAN card bracket on the WLAN card. 4 Replace the screw (M2x4) to secure the WLAN card bracket to the WLAN card. Next step 1 Install the battery. 2 Install the base cover. 3 Follow the procedure in After working inside your computer. Memory modules Removing the memory modules Prerequisites 1 Follow the procedure in Before working inside your computer. 2 Remove the base cover. 3 Disconnect the battery cable. About this task The figure indicates the location of the memory module and provides a visual representation of the removal procedure. 20 Disassembly and reassembly