Dell Vostro 7590 Service Manual - Page 27
Removing the M.2 2280 PCIe solid-state drive, Installing the M.2 2280 PCIe solid-state drive
![]() |
View all Dell Vostro 7590 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 27 highlights
Next step 1 Connect the battery cable. 2 Install the base cover. 3 Follow the procedure in After working inside your computer. Removing the M.2 2280 PCIe solid-state drive Prerequisites 1 Follow the procedure in Before working inside your computer. 2 Remove the base cover. 3 Disconnect the battery cable. About this task The figure indicates the location of the M.2 2280 PCIe solid-state drive and provides a visual representation of the removal procedure. Steps 1 Remove the screw (M2x4) that secures the solid-state drive to the system board. 2 Slide and remove the solid-state drive module from the solid-state drive slot on the system board. Installing the M.2 2280 PCIe solid-state drive Prerequisite If you are replacing a component, remove the existing component before performing the installation procedure. About this task The figure indicates the location of the M.2 2280 PCIe solid-state drive and provides a visual representation of the installation procedure: Disassembly and reassembly 27
![](/manual_guide/products/dell-vostro-7590-service-manual-b0f00fa/27.png)