Dell Vostro 7590 Service Manual - Page 57
Connect the display cable on to the connector on the system board and adhere the tape to the system
![]() |
View all Dell Vostro 7590 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 57 highlights
Steps 1 Place the display assembly on a clean and flat surface. 2 Align and place the palm-rest and keyboard assembly on the display assembly. 3 Using the alignment posts, close the display hinges. 4 Replace the three screws (M2.5x5) that secure the left-display hinge to the system board. 5 Replace the three screws (M2.5x5) that secure the right-display hinge to the system board. 6 Connect the display cable on to the connector on the system board and adhere the tape to the system board. Next step 1 Install the WLAN card. 2 Install the battery. 3 Install the base cover. 4 Follow the procedure in After working inside your computer. Disassembly and reassembly 57
![](/manual_guide/products/dell-vostro-7590-service-manual-b0f00fa/57.png)
Steps
1
Place the display assembly on a clean and
flat
surface.
2
Align and place the palm-rest and keyboard assembly on the display assembly.
3
Using the alignment posts, close the display hinges.
4
Replace the three screws (M2.5x5) that secure the left-display hinge to the system board.
5
Replace the three screws (M2.5x5) that secure the right-display hinge to the system board.
6
Connect the display cable on to the connector on the system board and adhere the tape to the system board.
Next step
1
Install the
WLAN card
.
2
Install the
battery
.
3
Install the
base cover
.
4
Follow the procedure in
After working inside your computer
.
Disassembly and reassembly
57