Dell Vostro 7590 Service Manual - Page 22
Solid-state drive, Removing the M.2 2280 solid-state drive
![]() |
View all Dell Vostro 7590 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 22 highlights
Steps 1 Lift the mylar and align the notch on the memory module with the tab on the memory-module slot. 2 Slide the memory module firmly into the slot at an angle. 3 Press the memory module down until it clicks into place. NOTE: If you do not hear the click, remove the memory module and reinstall it. Next step 1 Connect the battery cable. 2 Install the base cover. 3 Follow the procedure in After working inside your computer. Solid-state drive Removing the M.2 2280 solid-state drive Prerequisites 1 Follow the procedure in Before working inside your computer. 2 Remove the base cover. 3 Disconnect the battery cable. About this task The figure indicates the location of the solid-state drive and provides a visual representation of the removal procedure. NOTE: The computer is shipped with solid-state drive shield only if the solid-state drive capacity is more than 512 GB. 22 Disassembly and reassembly
![](/manual_guide/products/dell-vostro-7590-service-manual-b0f00fa/22.png)