Dell Vostro 7590 Service Manual - Page 54
Remove the three screws M2.5x5 that secure the right-display hinge to the system board.
View all Dell Vostro 7590 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 54 highlights
Steps 1 Locate the display cable and display hinges on your computer. 2 Peel the tape that secures the display cable to the system board. 3 Open the latch and disconnect the display cable from the system board. 4 Remove the three screws (M2.5x5) that secure the left-display hinge to the system board. 5 Remove the three screws (M2.5x5) that secure the right-display hinge to the system board. 6 Open the display hinges at an angle of 90 degrees. 54 Disassembly and reassembly
Steps
1
Locate the display cable and display hinges on your computer.
2
Peel the tape that secures the display cable to the system board.
3
Open the latch and disconnect the display cable from the system board.
4
Remove the three screws (M2.5x5) that secure the left-display hinge to the system board.
5
Remove the three screws (M2.5x5) that secure the right-display hinge to the system board.
6
Open the display hinges at an angle of 90 degrees.
54
Disassembly and reassembly