Dell Vostro 7590 Service Manual - Page 37
Heat sink, Removing the heat sink—UMA
![]() |
View all Dell Vostro 7590 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 37 highlights
Steps 1 Slide and place the CPU fan on the palm-rest and keyboard assembly. 2 Align the screw holes on the CPU fan with the screw holes on the palm-rest and keyboard assembly. 3 Replace the two (M2x4) screws to secure the CPU fan to the palm-rest and keyboard assembly. 4 Connect the CPU fan cable to the system board. Next step 1 Install the battery. 2 Install the base cover. 3 Follow the procedure in After working inside your computer. Heat sink Removing the heat sink-UMA NOTE: The heat sink type in your computer varies depending on the configuration ordered. Prerequisites 1 Follow the procedure in Before working inside your computer. 2 Remove the base cover. 3 Remove the battery. 4 Remove the GPU fan. 5 Remove the CPU fan. About this task The figure indicates the location of the heat sink and provides a visual representation of the removal procedure. Disassembly and reassembly 37
![](/manual_guide/products/dell-vostro-7590-service-manual-b0f00fa/37.png)