Dell Vostro 7590 Service Manual - Page 66
Connect the touchpad cable to the system board and close the latch to secure the cable.
![]() |
View all Dell Vostro 7590 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 66 highlights
Steps 1 Slide the ports on the system board into the slots on the palm-rest and keyboard assembly and align the screw holes on the system board with the screw holes on the palm-rest and keyboard assembly. 2 Replace the six screws (M2x4) that secure the system board to the palm-rest and keyboard assembly. 3 Connect the display cable on to the connector on the system board. 4 Adhere the tape that secures the display cable to the system board. 5 Replace the two screws (M2x5) that secure the USB Type-C port bracket to the system board. 6 Connect the keyboard-backlight cable to the system board and close the latch to secure the cable. 7 Connect the touchpad cable to the system board and close the latch to secure the cable. 8 Connect the speaker cable to the system board. 9 Connect the power-adapter cable to the system board. 10 Connect the I/O-board cable to the system board and close the latch to secure the cable. Next step 1 Install the display assembly. 2 Install the memory module. 3 Install the heat sink. 4 Install the left-side fan. 5 Install the right-side fan. 6 Install the WLAN card. 7 Install the M.2 2230 solid-state drive. 8 Install the M.2 2280 solid-state drive. 9 Install the battery. 10 Install the base cover. 66 Disassembly and reassembly
![](/manual_guide/products/dell-vostro-7590-service-manual-b0f00fa/66.png)