Dell Vostro 7590 Service Manual - Page 28
Hard drive, Removing the hard drive
![]() |
View all Dell Vostro 7590 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 28 highlights
Steps 1 Align the notch on the solid-state drive module with the tab on the solid-state drive slot. 2 Slide the solid-state drive module firmly into the solid-state drive slot at an angle. 3 Replace the screw (M2x4) that secures the solid-state drive module to the system board. Next step 1 Connect the battery cable. 2 Install the base cover. 3 Follow the procedure in After working inside your computer. Hard drive Removing the hard drive Prerequisites 1 Follow the procedure in Before working inside your computer. 2 Remove the base cover. 3 Disconnect the battery cable. About this task The figure indicates the location of the hard drive and provides a visual representation of the removal procedure. NOTE: The hard drive is available only in computers shipped with 3-cell battery. 28 Disassembly and reassembly
![](/manual_guide/products/dell-vostro-7590-service-manual-b0f00fa/28.png)