Dell XPS 15 9570 XPS 15 Service Manual - Page 23

Removing the hard drive, Prerequisites, Procedure

Page 23 highlights

11 Removing the hard drive WARNING: Before working inside your computer, read the safety information that shipped with your computer and follow the steps in Before working inside your computer. After working inside your computer, follow the instructions in After working inside your computer. For more safety best practices, see the Regulatory Compliance home page at www.dell.com/ regulatory_compliance. CAUTION: Hard drives are fragile. Exercise care when handling the hard drive. CAUTION: To avoid data loss, do not remove the hard drive while the computer is in sleep or on state. Prerequisites 1 Remove the base cover. 2 Remove the battery (half-length). Procedure NOTE: The hard drive is not available on systems shipped with 6-cell (full-length) battery. 1 Remove the four screws (M2x4) that secure the hard-drive cage to the palm-rest assembly. 2 Lift the hard-drive cage off the hard-drive assembly. Figure 7. Removing the hard-drive cage 1 screws (4) 2 hard-drive cage 3 hard-drive assembly 3 Using the pull tab, disconnect the hard-drive cable from the system board. 4 Lift the hard-drive assembly off the palm-rest assembly. Removing the hard drive 23

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94

Removing the hard drive
WARNING:
Before working inside your computer, read the safety information that shipped with your computer and follow the
steps in
Before working inside your computer
. After working inside your computer, follow the instructions in
After working inside
your computer
. For more safety best practices, see the Regulatory Compliance home page at
www.dell.com/
regulatory_compliance
.
CAUTION:
Hard drives are fragile. Exercise care when handling the hard drive.
CAUTION:
To avoid data loss, do not remove the hard drive while the computer is in sleep or on state.
Prerequisites
1
Remove the
base cover
.
2
Remove the
battery (half-length)
.
Procedure
NOTE:
The hard drive is not available on systems shipped with 6-cell (full-length) battery.
1
Remove the four screws (M2x4) that secure the hard-drive cage to the palm-rest assembly.
2
Lift the hard-drive cage
off
the hard-drive assembly.
Figure 7. Removing the hard-drive cage
1
screws (4)
2
hard-drive cage
3
hard-drive assembly
3
Using the pull tab, disconnect the hard-drive cable from the system board.
4
Lift the hard-drive assembly
off
the palm-rest assembly.
11
Removing the hard drive
23