Dell XPS 15 9570 XPS 15 Service Manual - Page 30

15 Removing the solid-state drive (full-length) WARNING: Before working inside your computer, read the safety information that shipped with your computer and follow the steps in Before working inside your computer. After working inside your computer, follow the instructions in After working inside your computer. For more safety best practices, see the Regulatory Compliance home page at www.dell.com/ regulatory_compliance. Prerequisites 1 Remove the base cover. 2 Remove the battery (half-length) or the battery (full-length). Procedure 1 Remove the screw (M2x3) that secures the solid-state drive to the system board. 2 Lift and slide the solid-state drive assembly from the system board. Figure 13. Removing the solid-state drive 1 screw 3 solid-state drive slot 3 Peel the thermal pad off the solid-state drive. 30 Removing the solid-state drive (full-length) 2 thermal pad 4 solid-state drive