Dell XPS 15 9570 XPS 15 Service Manual - Page 49

Replacing the audio daughter-board, Procedure, Post-requisites

Page 49 highlights

28 Replacing the audio daughter-board WARNING: Before working inside your computer, read the safety information that shipped with your computer and follow the steps in Before working inside your computer. After working inside your computer, follow the instructions in After working inside your computer. For more safety best practices, see the Regulatory Compliance home page at www.dell.com/ regulatory_compliance. Procedure 1 Align the connector on the audio daughter-board with the connector on the system board and snap it into place. 2 Replace the two screws (M2x3) that secures the audio daughter-board to the system board. Post-requisites 1 Replace the system-board assembly. 2 Replace the memory modules. 3 Replace the heat sink. 4 Replace the fans. 5 Replace the solid-state drive (half-length) or the solid-state drive (full-length). 6 Follow the procedure from step 3 to step 6 in "Replacing the hard drive". 7 Replace the wireless card. 8 Replace the battery (half-length) or the battery (full-length). 9 Replace the base cover. Replacing the audio daughter-board 49

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94

Replacing the audio daughter-board
WARNING:
Before working inside your computer, read the safety information that shipped with your computer and follow the
steps in
Before working inside your computer
. After working inside your computer, follow the instructions in
After working inside
your computer
. For more safety best practices, see the Regulatory Compliance home page at
www.dell.com/
regulatory_compliance
.
Procedure
1
Align the connector on the audio daughter-board with the connector on the system board and snap it into place.
2
Replace the two screws (M2x3) that secures the audio daughter-board to the system board.
Post-requisites
1
Replace the
system-board assembly
.
2
Replace the
memory modules
.
3
Replace the
heat sink
.
4
Replace the
fans
.
5
Replace the
solid-state drive (half-length)
or the
solid-state drive (full-length)
.
6
Follow the procedure from step 3 to step 6 in “
Replacing the hard drive
”.
7
Replace the
wireless card
.
8
Replace the
battery (half-length)
or the
battery (full-length)
.
9
Replace the
base cover
.
28
Replacing the audio daughter-board
49