Dell XPS 15 9570 XPS 15 Service Manual - Page 56

33 Removing the power-button module WARNING: Before working inside your computer, read the safety information that shipped with your computer and follow the steps in Before working inside your computer. After working inside your computer, follow the instructions in After working inside your computer. For more safety best practices, see the Regulatory Compliance home page at www.dell.com/ regulatory_compliance. Prerequisites NOTE: The fingerprint reader is available depending on the configuration ordered. 1 Remove the base cover. 2 Remove the battery (half-length) or the battery (full-length). 3 Remove the memory modules. 4 Follow the procedure from step 1 to step 4 in "Removing the hard drive". 5 Remove the solid-state drive (half-length) or the solid-state drive (full-length). 6 Remove the wireless card. 7 Remove the heat sink. 8 Remove the fans. 9 Remove the system-board assembly. Procedure 1 Remove the two screws (M1.6x3) that secure the power-button module to the palm-rest assembly. 2 Lift the power-button module off the palm-rest assembly. 56 Removing the power-button module