Dell XPS 15 9570 XPS 15 Service Manual - Page 27
Removing the solid-state drive (half-length), Prerequisites, Procedure
View all Dell XPS 15 9570 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 27 highlights
13 Removing the solid-state drive (half-length) WARNING: Before working inside your computer, read the safety information that shipped with your computer and follow the steps in Before working inside your computer. After working inside your computer, follow the instructions in After working inside your computer. For more safety best practices, see the Regulatory Compliance home page at www.dell.com/ regulatory_compliance. Prerequisites 1 Remove the base cover. 2 Remove the battery (half-length) or the battery (full-length). Procedure 1 Remove the screw (M2x3) that secures the solid-state drive assembly to the system board. 2 Lift and slide the solid-state drive assembly from the system board. Figure 11. Removing the solid-state drive assembly 1 screw 3 solid-state drive slot 2 solid-state drive assembly 4 system board 3 Turn the solid-state drive assembly over, and then remove the screw (M2x2) that secures the solid-state drive to the solid-state drive bracket. Removing the solid-state drive (half-length) 27