Dell XPS 400 Owner's Manual - Page 86
Integrated NIC Controller, the network cable to the integrated connector on the back panel.
View all Dell XPS 400 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 86 highlights
15 If you installed an add-in network adapter and want to disable the integrated network adapter: a Enter system setup select Integrated NIC Controller, and then change the setting to Off. b Connect the network cable to the add-in network adapter's connectors. Do not connect the network cable to the integrated connector on the back panel. 16 Install any drivers required for the card as described in the card documentation. Removing a PCI Express Card 1 Follow the procedures in "Before You Begin" on page 63. 2 Remove the computer cover (see page 68). release tabs (2) card retention door *lever on chassis wall alignment bar alignment guide filler bracket *may not be present on all computers 3 If present on your computer, rotate the lever on the chassis wall upward. 86 Removing and Installing Parts