Denon 2310CI Owners Manual - Page 17

ENGLISH Connecting devices n Copyright protection system (HDCP) The AVR-2310 supports HDCP (High-bandwidth Digital Contents Protection). HDCP is a copyright protection technology for digital video signals. The devices connected to the AVR-2310 must also support HDCP . NOTE • If the menu "HDMI Audio Out" setting (vpage 30) is set to "Amp" , the sound may be interrupted when the monitor's power is turned off. • The audio signal from the HDMI output terminal (sampling frequency, number of channels, etc.) may be limited by the HDMI audio specifications of the connected device regarding permissible inputs. Connecting Devices not Equipped with HDMI terminals Monitor (TV) • Select the terminal to use and connect the device. • For video connections, see "Converting input video signals for output (Video Conversion Function)" (vpage 9). For instructions on HDMI connections, see "Connecting Devices Equipped with HDMI terminals" on page 12. Monitor (TV) "6%*0 015*$"065 7*%&0 */ 7*%&0 4
7*%&0 */ $0.10/&/5
7*%&0 */ : 1# 13 Getting Started Connections NOTE When a device that does not support HDCP is connected, video signals are not properly output. n  Connecting to a device equipped with a DVI-D Settings Connections The AVR-2310 allows connection of inputs from up to 5 HDMI devices and output to 1 TV. When an HDMI/DVI conversion cable (sold separately) is used, the HDMI video signals are converted to DVI signals, allowing connection to a device equipped with a DVI-D terminal. terminal Playback NOTE • No sound is output when connected to a device equipped with a DVI-D terminal. Also make the audio connections. • Signals cannot be output to DVI-D devices that do not support HDCP . • Depending on the combination of devices, the video signals may not be output. Multi-Zone DVD Player Blu-ray Disc Player SAT/CABLE Tuner Digital Video Recorder Game Console Monitor (TV) )%.* 065 Remote Control )%.* 065 n Settings related to HDMI connections )%.* 065 Set as necessary. For details, see the respective reference pages. Input terminal assignment (vpage 35) HDMI Setup (vpage 30) )%.* 065 Set this when changing the input sources of the different terminals. Make these settings related to HDMI input/output signals. • RGB Range • Auto Lip Sync • HDMI Audio Out • HDMI Control • Standby Source • Power Off Control Information )%.* 065 Troubleshooting )%.* */ • Use a cable on which the HDMI logo is indicated (a certified HDMI product) for connection to the HDMI connector. Normal playback may not be possible when using a cable other than one on which the HDMI logo is indicated (a non-HDMI-certified product). • When the AVR-2310 is connected to other devices with HDMI cables, also connect the AVR-2310 and TV using an HDMI cable. • When a device supporting Deep Color signal transfer is connected, use a cable compatible with HDMI ver.1.3a. • Video signals are not output if the input video signals do not match the monitor's resolution. In this case, switch the Blu-ray Disc player / DVD player's resolution to a resolution with which the monitor is compatible. NOTE The audio signals output from the HDMI connectors are only the HDMI input signals. Specifications The component video connectors may be indicated differently on your monitor. For details, see the monitor's operating instructions. 13