Denon 2310CI Owners Manual - Page 36

ENGLISH Making detailed settings (Manual Setup) Getting Started Connections Settings Playback Multi-Zone Remote Control Information Troubleshooting Specifications Making other settings (Option Setup) Default settings are underlined. Setting items Setting contents Setting items Setting contents GUI Format : Set the video signal format to be output for the TV you are Make the settings related to using. displays on the TV screen. • NTSC : Select NTSC output. • PAL : Select PAL output. The "Format" can also be set by the following procedure. However, the GUI screen is not displayed. 1. Press and hold o on the main unit and for at least 3 seconds. "Video Format" appears on the display. 2. Press o p and set the video signal format. 3. Press , or to complete the setting. Volume Control Volume Display : Set the volume display method. Set the MAIN ZONE volume • Relative : The volume is displayed within the range of - - - dB (Minimum), setting. -80.5 dB ~ +18 dB. • Absolute : The volume is displayed within the range of 0, 1 ~ 99. Vol.Limit : Make a setting for maximum volume. • OFF : Do not set a maximum volume. • -20dB (61) / -10dB (71) / 0dB (81) Power On Level : This sets the volume set when the MAIN ZONE's power is turned on. • Last : Use the memorized setting from the last session Always use the muting on condition when power is turned on. • -80dB (1) ~ +18dB (99) : The volume is adjusted to the set level. Mute Level : This sets the amount of attenuation of the volume when the mute mode is set in the MAIN ZONE. • Full : The sound is cut off entirely. • -40dB : The sound is attenuated by 40 dB. • -20dB : The sound is attenuated by 20 dB. Source Delete TUNER / PHONO / CD / DVD / HDP / TV / SAT/CBL / VCR / DVR / Remove input sources V.AUX : Select the sources you do not want to use. that are not used from the • ON : Use this source. display. • Delete : Do not use this source. • The currently selected input source cannot be set. • Input sources set to "Delete" cannot be selected using NOTE When a format other than the video format of the connected TV is set, the picture will not be displayed properly. Text : The mode name is displayed when the operation for switching the surround mode, input mode, etc., is performed. • ON : Turn display on. • OFF : Turn display off. Master Volume : Master volume display during adjustment. • Bottom : Displayed at the bottom of the screen. • Top : Displayed at the top of the screen. • OFF : Turn display off. Tuner Information : This sets the time the GUI menu is displayed when a tuner operation is performed. • Always : Show display continuously. • 30sec : Show display for 30 seconds after operation. • 10sec : Show display for 10 seconds after operation. • OFF : Turn display off. iPod Information : This sets the time the GUI menu is displayed when an iPod operation is performed. • Always : Show display continuously. • 30sec : Show display for 30 seconds after operation. • 10sec : Show display for 10 seconds after operation. • OFF : Turn display off. NOTE . GUI Screensaver : Make screensaver settings. Make the settings related to • ON : The screen switches to the screensaver if no operation is performed displays on the TV screen. for approximately 3 minutes while a menu is displayed or while an iPod screen is displayed. When you press uio p, the screen saver is cancelled and the screen before that screen saver started is displayed. • OFF : Turn the screensaver function off. Wall Paper : Set wallpaper to display the background when playback is stopped, etc. • Picture : Set the background to a picture (DENON logo). • Black : Set the background to black. 2 Remote control operation buttons Displaying the menu : Cancel the menu : Moves the cursor (Up/Down/Left/Right) : Decision the setting : Return to previous menu