Denon 2310CI Owners Manual - Page 34

ENGLISH Making detailed settings (Manual Setup) Getting Started Connections Settings Playback Multi-Zone Remote Control Information Troubleshooting Specifications Making the HDMI settings (HDMI Setup) Default settings are underlined. Make settings for HDMI video/audio output. Setting items RGB Range Set the video range of RGB output from the HDMI terminal. Auto Lip Sync Automatic compensation for timing shift in audio and video output. HDMI Audio Out Select HDMI audio output device. Setting contents Normal : Output with RGB video range (16 (black) to 235 (white)). Enhanced : Output with RGB video range (0 (black) to 255 (white)). This setting is valid when using a TV equipped with a DVI terminal. ON : Compensated. OFF : Not compensated. Setting items Setting contents Standby Source Last : Standby with last used input source during power on. Set the HDMI connector for HDMI1 / HDMI2 / HDMI3 / HDMI4 / HDMI5 : The standby mode is set at HDMI signal input during the input source assigned to the respective. standby. This can be set when "HDMI Control" is set to "ON" . Power Off Control ON：Switched. The power of the AVR-2310 OFF：Not switched. and external device turn off • Please consult the operating instructions for each connected device together. to check the settings. • For details on the HDMI control function, see "Controlling HDMIThis can be set when compatible devices from the AVR-2310 (HDMI Control Function)" "HDMI Control" is set to "ON" . (vpage 52). Amp : Use speakers connected to AVR-2310 for audio playback. TV : Use speakers of TV for audio playback. NOTE When the HDMI control function is operating, the setting of audio playback in the connected TV takes priority (vpage 52 "Controlling HDMIcompatible devices from the AVR-2310 (HDMI Control Function)"). HDMI Control ON : Use the HDMI control function. External devices can be OFF : Do not use the HDMI control function. controlled from the AVR• Please consult the operating instructions for each connected device 2310 and the AVR-2310 can to check the settings. be controlled from external • For details on the HDMI control function, see "Controlling HDMIdevices. compatible devices from the AVR-2310 (HDMI Control Function)" (vpage 52). Making the audio settings (Audio Setup) Default settings are underlined. Make settings for audio playback. Setting items Setting contents NOTE The HDMI control function controls operations of a TV that is compatible with the HDMI control function. Make sure that the TV and HDMI are connected when you perform HDMI control. NOTE • When "Control" is set to "ON" , it consumes more standby power. • When not using this unit for a long period, we recommend that you press to turn off (jOFF) the power. • When the "HDMI Control" setting has been changed, always turn off the power to the connecting devices afterwards and then turn back on. • The "HDMI Control" does not work when the power to the equipment is off. • When "HDMI Control" is set to "ON" , power is supplied constantly to the AC outlet (UNSWITCHED). EXT.IN SW Level +15dB : This is the recommended level. Set the playback level of the +10dB / +5dB / 0dB : Select the level according to the player being used. analog subwoofer signals input from the external input terminals (EXT. IN). 0 Remote control operation buttons Displaying the menu : Cancel the menu : Moves the cursor (Up/Down/Left/Right) : Decision the setting : Return to previous menu