Denon 2310CI Owners Manual - Page 28
Denon 2310CI - AVR AV Receiver Manual
UPC - 883795000918
View all Denon 2310CI manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 28 highlights
ENGLISH Making the Optimum Settings for the Connected Speakers Automatically (Audyssey™ Auto Setup) Getting Started Connections Settings Playback Multi-Zone Remote Control Information Troubleshooting Specifications Set the channel to be measured (Channel Select) • Front T he front speaker to be measured can be selected ahead of time here. • Subwoofer, Surround Back I f you set the channels you will not use beforehand, those channels will not be measured. Therefore, you can save an amount of time commensurate with that which would have been taken to measure those channels. d Performing "Audyssey Auto Setup" Procedure • Audyssey Auto Setup detects the presence of each speaker and automatically calculates the speaker size, channel level, distance, and optimal crossover frequency setting. Audyssey MultEQ® corrects acoustical distortions within the listening area. • Once started, MultEQ will play a series of test tones through each speaker. • Before starting, connect and position all of your speakers. STEP3 Measurement the screen on 5 Once the right appears, AUTO SETUP AUTO SETUP MultEQ [3/6] micAUDYSSEY STEP3 Please rophone at 2nd Measurement place at the ear height 1 Press ui to select "Channel Select", then press AUTO SETUP AUDYSSEY STEP1 and ing Set AUTO SETUP MultEQ Preparation the the in if speakers accordmanual. recommendathe them Connect to the place ations items Amp Auto following nesessary. Select Start ENTER Skip unused ch's Enter for RETURN Cancel Assign Setup Channel . [1/6] move the setup microphone to the second position, use ui to select "Measure", then press . listenimg position. Measure Next Calculation ENTER Start next measurement. Enter Test Tone RETURN will Cancel start STEP2 Speaker Detection Measurements for the second position begin. ui to select "Auto Setup Start", then press 1 Press . Perform Step 5 repeatedly for the 3rd, 4th, 5th, and Select "Measure" 6 6th measurements. 2 and then press . b To skip this step, select "Next STEP4 . Calculation" and proceed to AUTO SETUP AUDYSSEY Speaker place at AUTO SETUP MultEQ STEP2 Detection micheight [2/6] Please at the rophone main ear measurement timesaving. listening position. Once measurements for the sixth position are completed, "Measurements finished. " is displayed. 2 the item, and then press Press ui to select a channel, press o p to select . Measure b Measure at a total of six positions, including the main listening ENTER Enter RETURN Cancel will start for measurement Te s t Tone n Front A B : The sound is output from front speakers A when measuring the front speakers. : The sound is output from front speakers B when measuring the front speakers. and B when measuring the front speakers. Once all the speakers have been detected, check the 3 results of detection of the connected speakers. ui to 4 Press select "Next 1 AUTO SETUP AUDYSSEY Spkr AUTO SETUP MultEQ STEP2 Detect Check [2/6] Front Yes position and positions around it. It is possible to stop the settings with five positions or fewer, but for better results we recommend measuring at six positions. A + B : The sound is output simultaneously from front speakers A Measurement", then press . Center Subwoofer Surround S.Back Yes Yes Yes Yes 2spkrs Retry Next Measurement ENTER Goto Step3 (Measurement) Enter after RETURN speaker Cancel check n Subwoofer, Surround Back Measure : Measure the selected channel. Skip : Skip the selected channel and do not measure. . b To cancel, press When "Amp Assign" is set to "Normal" , only then is "Surround Back" displayed. 24 Remote control operation buttons Displaying the menu : Cancel the menu : Moves the cursor (Up/Down/Left/Right) : Decision the setting : Return to previous menu