Denon 2310CI Owners Manual - Page 40

ENGLISH Making the input settings (Input Setup) Getting Started Connections Settings Playback Multi-Zone Remote Control Information Troubleshooting Specifications Making the video settings (Video) Default settings are underlined. The items that can be set depend on the input source and the "Input Assign" setting. Setting items Setting contents Video Select Source : Play the picture and sound of the input source. Switch video input source DVD / HDP / TV / SAT/CBL / VCR / DVR / V.AUX : Select video input while listening to audio source to view. This can be set for individual input sources. signal. NOTE • It is not possible to select HDMI input signals. • When playing HDMI video input signals, the analog video signal of another input source cannot be selected for the HDMI video output. • Input sources for which "Delete" is selected at "Source Delete" (vpage 32) cannot be selected. • Input sources for which "None" is selected at "Input Assign" (vpage 35) cannot be selected. Video Convert The input video signal is converted automatically in function of the connected TV (vpage 9 "Converting Input Video Signals for Output (Video Conversion Function)"). • This can also be set by pressing •  To cancel, press . to select "Source" . HDP TV SAT/CBL This can be set when the input source is DVD VCR DVR V.AUX . ON : The input video signal is converted. OFF : The input video signal is not converted. Setting items Setting contents Resolution This can be set when the input source is set to DVD HDP TV Set the output resolution. SAT/CBL VCR DVR V.AUX , and when "i/p Scaler" is set to anything Resolution A (Analog) : Analog other than "OFF". Video AUTO : Detect monitor panel resolution and automatically set output Resolution H (HDMI) : HDMI resolution. 480p/576p / 1080i / 720p / 1080p / 1080p:24Hz : Select the output resolution. Progressive Mode This can be set when the input source is set to DVD HDP TV Select optimum progressive SAT/CBL VCR DVR V.AUX , and when "i/p Scaler" is set to anything mode for video material. other than "OFF" . AUTO : The video material is automatically detected and the appropriate mode is set. Video1 : Select mode suitable for video playback. Video2 : Select mode suitable for video and 30-frame film material playback. Aspect This can be set when the input source is set to DVD HDP TV Set the aspect ratio of the SAT/CBL VCR DVR V.AUX , and when "i/p Scaler" is set to anything video signal output from the other than "OFF" . HDMI terminal. Normal : Output at 4:3 aspect ratio. Full : Output at 16:9 aspect ratio. • When a non-standard video signal from a game machine or some other source is input, the video conversion function might not operate. In this case set "Video Convert" to "OFF" . • When "Video Convert" is set to "OFF" , the video conversion function does not work. In this case, connect the AVR-2310 and TV with the same type of cable. i/p Scaler TV SAT/CBL VCR DVR V.AUX This can be set to the DVD HDP The input source's resolution input sources. is converted to the resolution OFF : Do not use i/p scaler function. set at "Resolution" . Analog : Analog signals are converted to HDMI signals. Analog and HDMI : Both analog signals and HDMI signals are converted to the desired HDMI resolution. 36 Remote control operation buttons Displaying the menu : Cancel the menu : Moves the cursor (Up/Down/Left/Right) : Decision the setting : Return to previous menu