Denon 2310CI Owners Manual - Page 70
Denon 2310CI - AVR AV Receiver Manual
UPC - 883795000918
View all Denon 2310CI manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 70 highlights
ENGLISH GAudioH Symptom No sound is produced from center speaker. No sound is produced from surround speakers. No sound is produced from surround back speaker. Cause Countermeasure • You are playing a monaural source • The mode is set to something (TV, etc.) in the "STANDARD" other than "STANDARD" (Dolby/ (Dolby/DTS Surround) mode. DTS Surround). • The surround mode is set to • Set to a surround playback "STEREO" , "DIRECT" or "PURE mode. DIRECT" . • The surround back speaker's • Check the setting and change it power amplifier is assigned to a as necessary. different channel. • "S.Back" setting is set to • Set to something other than "None" . "None" . • The "Audio/Video Adjust" • Please set "Audio/Video Adjust" - "Audio Adjust" - "Surround - "Audio Adjust" - "Surround Back" settings are "OFF" . Back" to settings other than "OFF" . • Surround mode not set to a mode • Select a surround playback for 6.1- or 7 .1-channel playback. mode. • Subwoofer's power not turned • Turn on the subwoofer's power. on. • The "Subwoofer" setting at • Set to "Yes" . "Speaker Config. " is set to "No" . • The subwoofer is not properly • Check the connections. connected. • The subwoofer's volume is • Adjust the subwoofer's volume turned off. to an appropriate level. • Blu-ray Disc player / DVD player's • Set the Blu-ray Disc player / DVD audio output setting is not set to player. For details, refer to the bitstream. Blu-ray Disc player / DVD player's operating instructions. • Blu-ray Disc player / DVD player is • Use a DTS-compatible player. not compatible with DTS sound playback. • The AVR-2310's "Decode Mode" • Set to the "Auto" or "DTS" setting is set to "PCM" . mode. • The "Manual Setup" - "HDMI • Set to "Amp" . Setup" - "HDMI Audio Out" setting is set to "TV" . Page 44 Symptom No sound is output from the monitor connected with HDMI connections. Dolby TrueHD, DTS-HD, Dolby Digital Plus audio is not output. Cause Countermeasure • The "Manual Setup" - "HDMI • Set to "TV" . Setup" - "HDMI Audio Out" setting is set to "Amp" . Page 30 Getting Started Connections Settings Playback Multi-Zone Remote Control Information Troubleshooting Specifications 44, 45 27 28 47 GiPodH Symptom 44 - 27 11 53 - iPod cannot be played. • HDMI is not connected. • Connect the HDMI. • Blu-ray Disc player's audio output • Set the Blu-ray Disc player. For setting is not set to bitstream. details, refer to the Blu-ray Disc player's operating instructions. • Blu-ray Disc player is not • Use a DTS-compatible player. compatible with DTS sound playback. 12 - - Cause Countermeasure Page 35 14 - No sound is produced from subwoofer. • The input source assigned to • Switch to the input source "iPod Dock" is not selected. assigned at "iPod Dock" . • Cable is not properly connected. • Reconnect. • Control dock for iPod's AC • Plug the control dock for iPod's adapter is not connected to AC adapter into a power outlet. power outlet. DTS sound is not output. - 37 30 HDMI audio signals are not output from speakers. 66