Denon 2310CI Owners Manual - Page 41

ENGLISH Making the input settings (Input Setup) Getting Started Changing the Input Source's Input Mode and Decoding mode (Input Mode) Default settings are underlined. The selectable input modes depend on the input source and "Input Assign" setting (vpage 35 "Changing the Input Sources Assigned to the Input Terminals"). Setting items Setting contents Setting items Decode Mode Set the input decoding mode. Setting contents Auto : Detect type of digital input signal and decode and play source's automatically. PCM : Decode and play only PCM input signals. DTS : Decode and play only DTS input signals. • This can be set for input sources for which "HDMI" or "Digital" is assigned at "Input Assign" (vpage 35). • Normally set this to "Auto" . Connections Input Mode Auto : Automatically detect input signal and perform playback. Set the audio input modes for HDMI : Play only signals from HDMI input. (Excluding CD) the different input sources. Digital : Play only signals from digital input. Analog : Play only signals from analog input. EXT. IN : Play only signals from EXT. IN input. b Upon purchase, the settings of the different input sources are as shown below. Input source Default setting Input source Default setting DVD Auto HDP HDMI TV Digital SAT/CBL Auto VCR Analog Settings Changing the Input Source's Display Name (Rename) Default settings are underlined. Use this procedure to change the display name of the currently selected input source. Setting items Setting contents Playback Multi-Zone DVR Auto V.AUX Auto CD Analog TUNER Analog PHONO Analog Rename 1. Use o p to set the cursor to the character you want to change. Change the input source's 2. Use ui to change the character, then press . display name to the desired • Up to 8 characters can be input. name. • The input character type can be switched by pressing while the display name is being changed. • The types of characters that can be input are as shown below. GUpper case charactersH ABCDEFGHIJKLMNOPQRSTUVWXYZ GLower case charactersH abcdefghijklmnopqrstuvwxyz GSymbolsH GNumbersH 0123456789 (Space) Remote Control • T  he "HDMI" settings are made for input sources for which HDMI input terminals are assigned at "Input Assign" (vpage 35). •  The "Digital" settings are made for input sources for which digital input terminals are assigned at "Input Assign" (vpage 35). •  When a digital signal is properly input, the " " indicator lights on the display. If the " " indicator does not light, check the digital input connector assignment and the connections. •  The surround mode cannot be set if the input mode is set to "EXT. IN" . • This can also be set by pressing .  Each time you press the button, the input mode display will change. Auto EXT. IN HDMI Analog Digital Information  Default Yes : Reset to the defaults. The changed display names No : Do not reset to the defaults. are reset to the defaults. Troubleshooting Specifications Remote control operation buttons Displaying the menu : Cancel the menu : Moves the cursor (Up/Down/Left/Right) : Decision the setting : Return to previous menu 37