Denon S-5BD Owners Manual - English - Page 45

Playback (Multi-zone Function) in ZONE2 (Separate Room) • You can operate this unit so as to enjoy audio and video in a room (ZONE2) other than the MAIN ZONE (room where the unit is located). • You can simultaneously play back the same source in both the MAIN ZONE and ZONE2. You can also play back separate sources in the MAIN ZONE and ZONE2. Multi-zone Connections MAIN ZONE ZONE2 This unit L R 7*%&0 */ Pre main amplifier "69
*/ • See "REMOTE CONTROL Jacks" (vpage 17) for connection information concerning remote control operation in ZONE2. Audio and video Signals which can be Output in ZONE2 n Audio • Audio from a disc or SD memory card played back on this unit A multichannel source is converted to a 2-channel downmix signal and output. • Analog audio input to this unit • Audio of a device connected to the USB port • Control dock for iPod (analog audio) n Video • Video from a disc or SD memory card played back on this unit • Video input to this unit from a Control dock for iPod We recommend using high quality pin-plug cables for audio and video connections in order to prevent noise. NOTE • Audio and video input to this unit via HDMI is not output. • The GUI menu screen is not output. • DENON control dock for iPod ASD-11R switches to Browse Mode and cannot be operated. • The following media and sources cannot be played back simultaneously in the MAIN ZONE and ZONE2. • Disc (BD/DVD/CD) and SD memory card • FM and AM Playback 1 Turn on the pre main amplifier for ZONE2. Front 2 Switch DEVICE SELECT to "ZONE2". The remote control unit switches to the operating mode for ZONE2. 3 Press ON to turn on the ZONE2 power. The indicator on the display lights. • Also press input source select button when in standby mode, the power turns on. • When OFF is pressed, ZONE2 turns off. Input source select buttons NOTE When ZONE2 is powered on, the HDMI video resolution in the MAIN ZONE switches automatically according to the input signal. When this happens, it is not possible to switch to a different video resolution, even by pressing RESOLUTION. 4 Press input source select button. The audio/video signal of the selected source is output to ZONE2. • To switch the source output to ZONE2 to the source playing back at the MAIN ZONE, press SOURCE SELECT. 5 Adjust the volume of the pre main amplifier for ZONE2. ENGLISH 41 Troubleshooting Spec. Index Other Information Part Names Remote Control GUI Multizone Playback (Advanced) Settings Playback (Basic) Connections Simple Version Getting Started