Denon S-5BD Owners Manual - English - Page 8

Getting Started Simple Version Connections Playback (Basic) Settings Playback (Advanced) ENGLISH 1 Install 2 1 2 3 4 5 Connect 1 2345 This unit can perform 2.0/2.1 to 7.1-channel surround playback. Here, we explain setup using the example of 5.1-channel speaker playback. FL SW 120˚ FR C 22 - 30˚ SL Listening position SR Audio cable (sold separately) Subwoofer FL with built- in amplifier SW FR C Speakers Carefully check the left (L) and right (R) channels and + (red) and - (black) polarities on the speakers being connected to the this unit, and be sure to interconnect the channels and polarities correctly. Connecting the speaker cables Peel off about 10 mm of sheathing from the tip of the speaker cable, then either twist the core wire tightly or terminate it. FL Front speaker (L) FR Front speaker (R) C Center speaker SW Subwoofer SL Surround speaker (L) SR Surround speaker (R) • Install the surround speakers in a position 2 to 3 feet/60 to 90 cm higher than ear level. Front speaker Surround speaker 2 - 3 feet 60 - 90 cm GViewed from the sideH SL SR Speaker cables (sold separately) NOTE • Connect so that the speaker cable core wires do not protrude from the speaker terminal. The protection circuit may be activated if the core wires touch the rear panel or if the + and - sides touch each other (vpage 74 "Protection Circuit"). • Never touch the speaker terminals while the power supply is connected. Doing so could result in electric shock. Speaker impedance Front Center 4 - 16 Ω Surround Multizone GUI Remote Control Part Names Other Information Troubleshooting Spec. Index  The "Simple Version" describes the installation, connection and setup methods for 5.1-channel speakers. See page 34 for the installation, connection and setup methods for speakers other than 5.1-channel speakers.