EMC CX400 Installation Guide - Page 118
Make target SPs, available, Prepare Server, for PowerPath, Con Server, Checkpoint
View all EMC CX400 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 118 highlights
Linux Installation Checklist Task With Access Logix Reference Document 12 Server ❑ Add persistent bindings to the HBA driver configuration file. Make target SPs available Note: You need the WWPN of each SP port for the bindings. ❑ Reboot the server. HBA documentation (see URL on page 3-4) Linux documentation ❑ Checkpoint - Use Navisphere Manager's Connectivity Status dialog box Navisphere Manager to verify that each HBA is registered with the storage system. administrator's guide and online help ❑ Checkpoint - Make sure the /proc/scsi/scsi directory has entries for LUNZs. Note: LUNZs are required to register the server HBAs with the storage system because LUNs have not be configured yet. Linux documentation ❑ Checkpoint - Make sure the file /proc/scsi file in the directory for HBAs, has entries for the expected targets (HBAs). 13 Server Prepare Server for PowerPath ❑ Make sure you have 128 sd and sg devices in the /dev directory. ❑ Ensure that the PowerPath driver's major numbers (232-239) are not already in use. PowerPath for Linux installation guide 14 Storage System Configure ❑ Use Navisphere Manager to set general storage-system properties. ❑ Use Navisphere Manager to create RAID Groups, bind LUNs, create Storage Groups, and assign LUNs to Storage Groups. Navisphere Manager administrator's guide and online help ❑ Use Navisphere Manager to connect the server to a Storage Group. ❑ Reload the driver (if the driver is loaded as a module) or reboot the server HBA documentation (if the driver is static to the kernel) so that Linux recognizes the LUNs. Now the LUNs in the Storage Group look like any other disks in the server. ❑ Checkpoint - Make sure all LUNs have entries in the /proc/scsi/scsi file Linux documentation and in the directory for the HBAs in the /proc/scsi directory. If all LUN entries are missing from the file, verify the zoning. If only some Navisphere Manager LUNs are missing, use Navisphere Manager to check that the LUNs are online help assigned to the server's Storage Group. 3-10 EMC Installation Roadmap for CX-Series and FC-Series Storage Systems