EMC CX400 Installation Guide - Page 13

Prerequisites AIX Installation Checklists ◆ You must have a host that is • Running an operating system that can support the Navisphere Manager 6.X browser-based client. For an up-to-date list of such operating systems, refer to the Navisphere Manager 6.X release notes on http://powerlink.emc.com). • On a network that is connected to the storage-system server and that you will connect to the SPs in the storage system. ◆ For most configurations, you must also have a host that is • Running Navisphere CLI version 6.X. • On a network that is connected to the storage-system server and that you will connect to SPs in the storage system. ◆ You must have planned your LUNs and RAID Groups, and Storage Groups if you have Access Logix. Be sure to consider requirements for SnapView™ and MirrorView™ software if you have this software. The following documents will help you with this planning: • EMC Storage Systems CX400-Series and CX600-Series Configuration Planning Guide (P/N 014003113) • EMC CLARiiON CX300, CX500, CX500i, and CX700 Storage Systems Configuration Planning Guide (P/N 300-001-273) • EMC Fibre Channel Storage System Model FC4700-2 Configuration Planning Guide (P/N 014003087) PowerPath Configurations for AIX 1-3