EMC CX400 Installation Guide - Page 20

AIX Installation Checklists Task With Access Logix Reference Document 15 Storage System ❑ Use Navisphere Manager to set general storage-system properties. Configure ❑ Use Navisphere Manager to create RAID Groups, bind LUNs, create Storage Groups, and assign LUNs to Storage Groups. Navisphere Manager administrator's guide and online help ❑ Use Navisphere Manager to connect the server to a Storage Group 16 Storage System ❑ Plan your monitoring configuration. Navisphere Manager Set up Event Monitor administrator's guide ❑ Use Navisphere Manager to set user options, create templates, and set up and online help your monitoring configuration. 17 Server Configure devices ❑ Download the following command from ftp://ftp.emc.com/pub/elab/ powerpath/aix and execute it: emc_cfgmgr.sh AIX documentation ❑ Execute the following PowerPath command: powermt config PowerPath product guide ❑ Checkpoint - Verify that the server sees hdisk devices for the LUNs. AIX documentation ❑ Checkpoint - Verify that PowerPath sees all the paths to the LUNs with the PowerPath product following PowerPath command: guide powermt display dev=all class=clariion If PowerPath does not see the LUNs • Verify the server's connection to the Storage Group. • Verify that you registered your PowerPath license key if you have one. • Verify that the storage-system properties are as defined in step 12. ❑ Restart the Navisphere Host Agent or run the Navisphere Server Utility with the following AIX commands: Host Agent/ etc/rc.agent stop /etc/rc.agent start Server Utility /usr/lpp/HOSTUTIL/naviserverutil CX-Series Server Software for AIX Installation Guide ❑ Checkpoint if the Host Agent is installed - Use Navisphere Manager to Navisphere Manager verify that the LUNs are mapped to hdiskpower devices. administrator's guide and online help 1-10 EMC Installation Roadmap for CX-Series and FC-Series Storage Systems