EMC CX400 Installation Guide - Page 35
Storage System, Set up security, Set properties for, PowerPath, Cable additional, or replacement
View all EMC CX400 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 35 highlights
AIX Installation Checklists Task With Access Logix Reference Document 12 Storage System Set up security ❑ Use Navisphere Manager to define a global administrator and domain (if not already defined) and any additional users. Navisphere security administrator's guide and Navisphere Manager online help 13 Storage System ❑ Set properties for PowerPath Use the following Navisphere CLI commands to set the storage system's, and array commpath properties: navicli -h hostname systemtype -config 3 Navisphere CLI reference navicli -h hostname failovermode 1 navicli -h hostname arraycommpath 1 where hostname is the IP address or network name of an SP in the storage system. Note: Setting the array commpath property to 1 (enabled) creates LUNZ devices. 14 Server ❑ Cable any additional or replacement HBA ports to the switch connected to Storage-system setup Cable additional the storage system or to SP ports. guide. or replacement ❑ Execute the following AIX command: HBAs to switches AIX documentation or storage cfgmgr system ❑ Checkpoint - For a SAN, verify the HBA connections to the switch by checking the LED(s) for the switch port connected to each additional HBA port. For a 1-Gbit switch - LED is green, which indicates that the HBA port is logged in to the switch port. For a 2-Gbit switch - One of the following: Switch documentation • The left LED is green and the right LED is off, which indicates that a 1-Gbit SP port is logged in to the switch port. • For a DS-xxB2 switch, both LEDs are green, which indicates that a 2-Gbit HBA port is logged in to the switch port. • For a DS-xxM2 switch, the left LED is blue and the right LED is off, which indicates that a 2-Gbit HBA port is logged in to the switch port. 15 Switches Zone For a SAN ❑ Zone the switches to provide a path from each new HBA port (host initiator) to the appropriate SPs. Switch management documentation ❑ Checkpoint - Use switch management software to verify the switch connections to the storage system. PowerPath Checklist - Existing AIX Server and New Storage System 1-25