EMC CX400 Installation Guide - Page 44
For existing HBAs, Initiator Type
![]() |
View all EMC CX400 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 44 highlights
AIX Installation Checklists Task With Access Logix Without Access Logix Reference Document 9 Storage System Set properties for PowerPath (cont.) For any HBAs (cont.) Navisphere CLI ❑ Use the following Navisphere CLI reference commands to set the storage system's default failover mode and array commpath properties: navicli -h hostname failovermode 1 navicli -h hostname arraycommpath 1 where hostname is the IP address or network name of an SP in the storage system. Note: Setting the array commpath property to 1 (enabled) creates LUNZ devices. You will have to remove the LUNZ devices later in the procedure. For existing HBAs ❑ Use Navisphere Manager's Failover Setup Wizard (selected from the Tools menu on the toolbar) to set the storage system's initiator type, failover mode, and array commpath properties for the server's HBA ports (initiators): Initiator Type to CLARiiON Open Failover mode to 1 Navisphere Manager administrator's guide and online help Array commpath to Enabled Note: Setting the array commpath property to 1 (enabled) creates LUNZ devices. You will have to remove the LUNZ devices later in the procedure. 1-34 EMC Installation Roadmap for CX-Series and FC-Series Storage Systems
![](/manual_guide/products/emc-cx400-installation-guide-6f1c92e/44.png)