EMC CX400 Installation Guide - Page 28

AIX Installation Checklists Task With Access Logix Without Access Logix Reference Document 11 Server ❑ List the LUNZ devices with the Make target SPs following AIX command: available (cont.) lscfg | grep LUNZ ❑ List the LUNZ devices with the following AIX command: lscfg | grep LUNZ AIX documentation ❑ Remove each LUNZ device with the following AIX command: rmdev -dl hdiskn where n is the hdisk number for the LUNZ device. ❑ Remove each LUNZ device with the following AIX command: rmdev -dl hdiskn where n is the hdisk number for the LUNZ device. ❑ Use the following Navisphere CLI ❑ Use the following Navisphere CLI Navisphere CLI command to set the array command to set the array reference commpath property to 0: commpath property to 0: navicli -h hostname arraycommpath 0 navicli -h hostname arraycommpath 0 where hostname is the IP address or network name of an SP in the storage system. where hostname is the IP address or network name of an SP in the storage system. ❑ Execute the following AIX command: cfgmgr ❑ Execute the following AIX command: cfgmgr AIX documentation 12 Storage System Configure ❑ If the server will use an existing N/A Storage Group, use Navisphere Manager to connect the server to the Storage Group. Navisphere Manager administrator's guide and online help ❑ If the server will use a new Storage Group, use Navisphere Manager to create RAID Groups, bind LUNs, create the Storage Group, and assign LUNs to the Storage Group. ❑ Use Navisphere Manager to connect the server to the Storage Group. 13 Storage System Set up Event Monitor ❑ Plan your monitoring configuration. ❑ Use Navisphere Manager to set user options, create templates, and set up your monitoring configuration. ❑ Plan your monitoring configuration. ❑ Use Navisphere Manager to set user options, create templates, and set up your monitoring configuration. Navisphere Manager administrator's guide and online help 1-18 EMC Installation Roadmap for CX-Series and FC-Series Storage Systems