EMC CX400 Installation Guide - Page 99

HP-UX Installation Checklist Task With Access Logix Reference Document 6 Server Install Host Agent ❑ Install the Navisphere Host Agent. ❑ Modify user login scripts. CX-Series Server Software for HP-UX Installation Guide ❑ Edit the Navisphere Host Agent configuration file (agent.config) as follows: • Add the following entry if it does not already exist: device auto auto • Add at least one privileged user. ❑ Verify that the Navisphere Host Agent configuration file (agent.config) has the following entry commented out: # Options Supported Autotrespass (leading # is present) The above entry will set the initiator type for the HBAs to auto trespass when Host Agent is restarted later in this procedure. ❑ Continue to edit other entries in the Navisphere Host Agent configuration file (agent.config) as desired. ❑ Restart the Host Agent to register the HBAs with the storage system. 7 Storage System ❑ Use Navisphere Manager to define a global administrator and domain (if Set up security not already defined) and any additional users. Navisphere security administrator's guide and Navisphere Manager online help 8 Storage System ❑ Use the following Navisphere CLI commands to set the default failover Set properties mode and array commpath properties with the following commands: Navisphere CLI reference navicli -h hostname failovermode 2 navicli -h hostname arraycommpath 1 where hostname is the IP address or network name of an SP in the storage system. 9 Storage System ❑ Use Navisphere Manager to set general storage-system properties. Configure Navisphere Manager administrator's guide and online help ❑ Use Navisphere Manager to create RAID Groups, bind LUNs, create Storage Groups, and assign LUNs to Storage Groups. ❑ Use Navisphere Manager to connect the host initiators to Storage Groups. DMP Checklist - New HP-UX Server and New Storage System 2-49