EMC CX400 Installation Guide - Page 36

AIX Installation Checklists Task 16 Server Make target SPs available 17 Storage System Configure 18 Storage System Set up Event Monitor With Access Logix Reference Document ❑ Download the following command from ftp://ftp.emc.com/pub/elab/ powerpath/aix and execute it: AIX documentation emc_cfgmgr.sh ❑ Checkpoint - Verify that AIX sees LUNZ devices with the following AIX command: lscfg | grep LUNZ If AIX does not see LUNZ devices • Verify that arraycommpath is set to 1 as described in step 12. • Execute the following AIX command: emc_cfgmgr.sh ❑ Restart the Navisphere Host Agent or run the Navisphere Server Utility with the following AIX commands: Host Agent/ etc/rc.agent stop /etc/rc.agent start CX-Series Server Software for AIX installation guide Server Utility /usr/lpp/HOSTUTIL/naviserverutil ❑ Checkpoint - Use Navisphere Manager's Connectivity Status dialog box Navisphere Manager to verify that each HBA is registered with the storage system. administrator's guide and online help ❑ List the LUNZ devices with the following AIX command: AIX documentation lscfg | grep LUNZ ❑ Remove each LUNZ device with the following AIX command: rmdev -dl hdiskn where n is the hdisk number for the LUNZ device. ❑ Use Navisphere Manager to set general storage-system properties. ❑ Use Navisphere Manager to create RAID Groups, bind LUNs, create Storage Groups, and assign LUNs to Storage Groups. Navisphere Manager administrator's guide and online help ❑ Use Navisphere Manager to connect the server to a Storage Group ❑ Plan your monitoring configuration. Navisphere Manager ❑ Use Navisphere Manager to set user options, create templates, and set up your monitoring configuration. administrator's guide and online help 1-26 EMC Installation Roadmap for CX-Series and FC-Series Storage Systems