EMC CX400 Installation Guide - Page 27
Without Access Logix
![]() |
View all EMC CX400 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 27 highlights
AIX Installation Checklists Task With Access Logix Without Access Logix Reference Document 11 Server ❑ On the server: Make target SPs available • Download emc_cfgmgr.sh from ftp://ftp.emc.com/pub/elab/ powerpath/aix. • Execute the following commands cfgmgr ❑ On the server: • Download emc_cfgmgr.sh from ftp://ftp.emc.com/pub/elab/ powerpath/aix. • Execute the following commands cfgmgr AIX documentation ❑ Checkpoint - Verify that each ❑ Checkpoint - Verify that each HBA sees only the targets (SPs) HBA sees only the targets (SPs) to which it is zoned with the to which it is zoned with the following AIX command: following AIX command: lsdev -Cc array lsdev -Cc array ❑ Checkpoint - Verify that AIX sees ❑ Checkpoint - Verify that AIX sees LUNZ devices with the following LUNZ devices with the following AIX command: AIX command: lscfg | grep LUNZ lscfg | grep LUNZ If AIX does not see LUNZ devices If AIX does not see LUNZ devices • Verify that arraycommpath is set to 1 as described in step 12. • Verify that arraycommpath is set to 1 as described in step 12. • Execute the following AIX command: emc_cfgmgr.sh • Execute the following AIX command: emc_cfgmgr.sh ❑ Restart the Navisphere Host Agent or run the Navisphere Server Utility with the following AIX commands: ❑ Restart the Navisphere Host Agent or run the Navisphere Server Utility with the following AIX commands: CX-Series Server Software for AIX Installation Guide Host Agent/ etc/rc.agent stop /etc/rc.agent start Host Agent/ etc/rc.agent stop /etc/rc.agent start Server Utility Server Utility /usr/lpp/HOSTUTIL/naviserverutil /usr/lpp/HOSTUTIL/naviserverutil ❑ Checkpoint - Use Navisphere ❑ Checkpoint - Use Navisphere Navisphere Manager Manager's Connectivity Status Manager's Connectivity Status administrator's guide dialog box to verify that each HBA dialog box to verify that each HBA and online help is registered with the storage is registered with the storage system. system. PowerPath Checklist - New AIX Server and Existing Storage System 1-17
![](/manual_guide/products/emc-cx400-installation-guide-6f1c92e/27.png)