Edimax EW-7228APn Manual - Page 26
II-6., Hardware Installation, Access Point Mode, AP Client Mode, Repeater Mode
View all Edimax EW-7228APn manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 26 highlights
II-6. Hardware Installation After configuring your device, you can install it in its final location. Access Point Mode Connect one port of the device to your router or xDSL modem. You can now connect a computer or other network device to the access point wirelessly by locating and connecting to its SSID. Or you can connect a computer/device to the access point using an Ethernet cable. AP Client Mode Connect one port of the access point to the network device you wish to connect to the Internet wirelessly, e.g. a games console or smart TV. Your network device should now be connected to your existing wireless network. Repeater Mode Position the device in a location for optimal wireless extension; usually a central location in your house or roughly an equal distance between your router and the furthest wireless client. You can connect to the access point wirelessly by locating and connecting to its SSID. 26