Edimax EW-7228APn Manual - Page 41
III-2-5., AP Bridge-WDS
View all Edimax EW-7228APn manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 41 highlights
Channel Number MAC address 1-4 Set Security 2.4GHz (G), only access points using the wireless band you select (802.11b, 802.11n, or 802.11g) will be able to connect to this device. If you select 2.4GHz (B+G), then only access points using the 802.11b and 802.11g bands will be able to connect to this device. If you want to allow 802.11b, 802.11g, and 802.11n access points to connect to this device, select 2.4GHz (B+G+N). Please select a channel number you wish to use. The channel number must be same as the other wireless access points you wish to connect to. Please input the MAC addresses of the wireless access points you wish to connect to. Click this button to select an encryption mode for this wireless link. A popup window with security options will appear. Click "APPLY" to save changes. The following message will appear: Click "CONTINUE" to save the changes but not apply them yet. This allows you to make further changes in the browser-based management interface, before applying them all at once. Click "APPLY" to restart the device and implement any changes. The device will restart itself. III-2-5. AP Bridge-WDS In this mode, this access point will connect to up to four other wireless access 41